Zebrano Framework Revisited

Hmm, my cats grow, but the frame is yet not finished... :) I should put it on my desk again...

Blackie Update

My Blackie custom (box and faceplate by bencao74) is finished, at least for now... still want to add Wii support, but that will involve some heavy soldering...

Freeza Stick about to finish! Big Sized Case!

Jo, this one is not for children. 50cm length!

Take a closer look at the new inner panel layer technique.

- 1 sheet plexi 2mm
- 1 sheet ply wood 4mm
- 1 sheet play wood 6mm

Nuts Part 3

Just finished my first nut wood custom for Maresuke! Have fun!

- Nut Wood
- Dual Mod Xbox360 and PS3



Great Artwork, that underlines the artwork in the clear push buttons.

Neutrons Clan.

The pics speaks for themself.


Yeah, clean wiring visible thru a clear 4mm plexi plate.

Nuts parts 2

Today was the day! Finally I`ve completed Maresukes Case and now the most exciting parts comes: The assembly of the inner panel plus Artwork.
Main questions:

- Does the inner panel fit?
- Is the Plexi top panel even to the case size?
- Does the coors of the artwork match?


Since I`ve now enough experience with the laser cutter I do not use wood alone for the innerpanel.

I use a sandwich technique
- 2mm lasercut Plexi on top
- Artwork printed on 160g paper
- 4mm lasercut plexi for mounting stick and button
- 10 mm plywood

--> That`s real sturdy :)

Enjoy the pics!
PCB Mounting - Supports xbox360, PC, PS3

All the layers are screwed into the case!


Looks clean, eh?
Artwork delivered from Maresuke with clan symbol.

Nut Wood - first time, first love

Before and after wood crafting :)









Yes, first time I used real wood. It`s normal nut and I`m pleased with the results. I had problems with the filler, anyway check the first pic. There you see the original wood and next to it my case :))

Just another Case, but new top panel mounting...

The new cases takes advantage of my acryl work. The Top Panel consists now of three layers :

- 2mm Plexi Top Panel
- 4mm Plexi Inner Panel with mounting holes for stick and button
- 10mm Wood Plate to give sturdiness

Have fun

Nut Wood countersinking

Hey,

done today the countersinking job for Maresukes customs. It`s great to work finally with real wood, in this case nut.

Lower piece is raw, the above is after countersinking...





And here is a MDF case primered.

Cases Study

Okay, here`re some cases. I`ve finished my self build new router table and it works great. I've to recommend here this book



The bible for work with router. Take a look at my results.