Monday 10 October 2011

ARC EYE v2

Some ages ago Purplearms sent me some ARC EYE v2. I´ve now assembled some for Willy and it was quite fun :)

They comes now with a footprint of 2.54mm for the pinout. Thus make it possible to solder normal pionheader to the PCB.

Mike made a laser cut acryl template to drill exactly the holes needed.



They fit exactly in the seimitsu clear pushbuttons.


Additional to the pinheader there is custom daisychain wiring.

RGB Cable -> connect to GND
Black Cable -> connect to 5V

In the above example the is one button black wire connected to 5V.

Have fun











1 comment:

Punkverraeter said...

Solltest Du auf jeden Fall vertreiben.

Das macht vieles einfacher....