Dual Strike Pin Mapping for connecting any kind of game controllers

TAKE CARE! THIS IS PIN MAPPING FOR THE EARLY VERSION DUAL STRIKE WITH EXTERNAL SWITCH. DONT USE IT FOR SUPER DUAL STRIKE!

Hey,

here's the promised pin mapping for connecting external game controller pcb. Dual Strike PCB support so far natively PC and PS3. Of course it's possible to support other consoles like Dreamcast, PS2 or even xbox360 (and all others). Just use the simple dual mod connector.

The mapping here is standard TE Layout. Just connect LK to xbox360 button "A", MK to "B", LP to "X", MP to "Y", ...
Notation in brackets is notation on PCB. Use this table for connecting the screw terminaly, too.

Pin No.	Bemu Slang	xbox360	Ps1, PS2
Pin 1	High Punch (HP)	RB	R1
Pin 2	5V	red wire USB
Pin 3	up (up)
Pin 4	down (dw)
Pin 5	left (lf)
Pin 6	right (rg)
Pin 7	Low Punch (LP)	X	Square
Pin 8	Low Kick (LK)	A	Cross
Pin 9	Medium Punch (MP)	Y	Triangle
Pin 10	Medium Kick (MK)	B	Circle
Pin 11	Start	Start	Start
Pin 12	Select	Select	Back
Pin 13	D-	USB white wire	nc
Pin 14	High Kick (HK)	RT	R2
Pin 15	D+	USB green wire
Pin 16	GND	USB black wire
Pin 17	Fourth Punch (4P)	LB	L1
Pin 18	Fourth Kick (4K)	LT	L2
Pin 19	HOME	HOME	GUIDE
Pin 20	nc

sorry for this gap, but this blog form sucks...

Dual Strike (was Lulu) meets Dreamcast

Hey,

today a Dreamcast Padhack came along and meets the Dual Strike PCB (Lulu was renamed to Dual Strike).



DC has two serial datalines for the pad. So I`ve used this two datalines and connected them to USB Cable instead of D+ and D- usb datalines. Then I connected the buttons stuff to the additional DUAL Mod interface of the Dual Strike PCB. The datalines goes to the DPDT switch. This switch selects between the USB datalines for PC/ PS3 and Dreamcast datalines. So the user of this nice piece of hardware can easily switch between PS3 and Dreamcast support for their consoles.



Piggyback DC to Dual Strike PCB.



Dreamcast to USB cable ;) Don't get me wrong. It`s not a converter.



Switch selects between PS3 and Dreamcast

Lulu on the run...

I did further testing for my Ps3 / PC Controller. Yes, Dual Mod integration works fine. Just connect a padhacked xbox360 cg pad similar to the UPCB and connect a switch for the usb datalines.



now you can switch with the black switcher between xbox360 and ps3.



Size comparsion to the Chutulu. My realization is a little bit smaller and has better dual mod support. Sure, no complaints against Chutulu. It's a fine piece of hw.

Lulu Boards arrived!!

Hey,

leave me a message if you want one. Grab this one in case you want a V-USB breakout. all pins are connected with screw terminal. So this PCB is general purpose and easy to use V-USB realization.

Leave me some suggestions for a new name for this project! Best proposal gets a free board.

Lulu Source Released

Hi,

the source for the Lulu PCB is released. What is Lulu. Lulu is a PC and PS3 USB Gamecontroller on the basis of Atmega8. It's open source and under GPL. Enjoy

Source

v0.1
Working:

- 8 Buttons
- Stick
- Select, Start

known bugs:
- PS Home is not working

TODO make the home button work.

Bye,

Ben

LULU schematic released!

So I've stripped of anything not PS3 specifc things (nokia display, trubo, ...). This is the core needed for the ps3 controller

partlist

Part Value Device Package

C1 22pF C-EU025-025X050 C025-025X050
C2 22pF C-EU025-025X050 C025-025X050
C3 100nF C-EU025-025X050 C025-025X050
C4 47uF CPOL-EUE2-5 E2-5
C18 100n C2,5-3 C2.5-3
D3 3v6 ZENER-DIODEZD-7.5 ZDIO-7.5
D4 3v6 ZENER-DIODEZD-7.5 ZDIO-7.5
IC1 ATMEGA8-PU ATMEGA8-PU DIL28-3
JP1 M03SCREW SCREWTERMINAL-3.5MM-3
JP2 AVR-ISP-6 AVR-ISP-6 AVR-ISP-6
JP3 M03SCREW SCREWTERMINAL-3.5MM-3
JP4 M03SCREW SCREWTERMINAL-3.5MM-3
JP6 M03SCREW SCREWTERMINAL-3.5MM-3
JP7 M03SCREW SCREWTERMINAL-3.5MM-3
Q1 12Mhz CRYSTALHC49S HC49/S
R4 68 R-EU_0204/2V 0204V
R5 68 R-EU_0204/2V 0204V
R6 1k5 R-EU_0204/2V 0204V
S1 USB-B 327560-2

I've added a isp programming connector. Source supports now 13 buttons, but 11 buttons are mapped to the pins.

thanks for attention :)

Cuthulu Rebuild: Lulu Finished

Cuthulu Rebuild:

I've ordered some Cuthulus at LLick. But they was expensive, fee and long delivery times. So I've rebuild a ps3 usb controller for my own. Thanks to Paul!!

PS3 Controller PCB

Hi,

so I´m in electronics again. Mojochan has developed a nice agetech mod with a self build PS3 Controller. Of course this is worth enough to make a rebuild. Assembly is quite easy, 3 resistors, 1 crystal, 4 condensators, 2 diodes, USB Jack, pinheader and atmega8.

http://denki.world3.net/dcstick.html

And the best: It's open source and free for extending







TODO : Test with PS3