Supergun MAK Strike with CPS Kick Harness

Original project photo unavailable. This entry describes a homemade CPS-2 kick harness attached to the MAK Strike screw terminals.

Hey,

 this is my take on self-made CPS-2 kick harness. As one can see clearly i`ts no problem to attach to the screw terminals of the Supergun MAK Strike.

CPS-2 Kick Harness Pinout

The original CPS-2 kick-harness pinout diagram is no longer available here. Check the pinout documentation for the exact PCB and harness before wiring.

Volume is not wired.

Current product information

This post shows an earlier MAK Strike Supergun version, setup, or project. Hardware and options may have changed; check the current product page against your arcade PCB, controller, display, and wiring before use. See: MAK Strike Supergun.